Partially hydrolyzing polyacrylamide is a high molecular weight polymer with a moderate anionic charge for drilling mud additive. It can be used in both industrial and oil field drilling application and it is usable in both fresh water and brines. It can be used in high temperature.

1. Water treatment: reduce the amount of flocculant used; Improve water quality; Improve the strength and settling speed of flocs; Anti corrosion and anti scaling of circulating cooling systems.
2. Oil extraction: Polyacrylamide aqueous solution has high viscosity and good thickening, flocculation, and rheological regulation effects. Used as an oil displacement agent and drilling mud regulator in oil extraction.
3. Paper making: Polyacrylamide is widely used in the field of paper making as a retention aid, filter aid, homogenizer, etc. To improve the quality of paper, the dewatering performance of pulp, and the retention rate of fine fibers and fillers. Reducing raw material consumption and environmental pollution, used as a dispersant, can improve the uniformity of paper.

To obtain homogeneous solution, efficient dispersion is necessary. The most convenient method of dispersing these products is with a polymer eductor or a commercially available dry powder feeder unit. Solution should be made up at 0.1 - 0.3% solid. Make-up water temperature should be between 10 and 48℃ for optimum product performance. Following dispersion into agitated water, stirring should continue for about an hour to ensure complete dissolution. Stirring maybe carried out by propeller type stirrer with a speed of 200 - 500rpm. It is recommended to have both a stock make-up tank and a solution holding tank for dosage into the system. The above recommended anionic solution concentration are stable for up to one week. Aluminum, zinc, copper, or iron should be avoided in make-up system.

25kgs craft paper bags.